Pool Maintenance: How to Clean Your Swimming Pool

I had a few people ask me about automatic pool cleaners. We are always looking for ways to make pool ownership a little easier so we can enjoy it more, and what better way than to let a machine clean the pool for you? Below I will go over the 3 types of automatic pool vacuums; suction side cleaners, pressure side cleaners, and self contained robotic cleaners. Suction side cleaners When we talk about the suction side of your pool we are referring to the ports in which the water is sucked out of the pool and into the filter. These ports include your skimmer, main drain, and possibly, a side wall suction. Suction Side hook-up A suction side cleaner is an automatic pool vacuum that hooks up to your suction line, in most cases your skimmer basket. These units generally install much like your manual pool vacuum using a suction plate that covers the skimmer basket. The vacuum suction moves a small check valve in the cleaner creating a kind of hopping motion that moves the cleaner around the pool. These cleaners move randomly and generally take longer to clean the pool because of that.

Opening Your Pool

Components of a swimming pool are highly interdependent. Without proper operation of each element, water quality and comfort degrade and damage may occur to other components. The basics of pool design are consistent whether applied to in-ground or above-ground pools. The system is engineered to keep a large volume of water properly filtered, circulated, heated and treated with disinfecting chemicals.

The two most critical elements in any pool system are the pump and the filter. Pool Circulation A pool pump circulates water from the pool through the filter and back to the pool.

When you vacuum your pool, do you use a skim vac or plate that sits on top of the basket to hook up the vacuum hose? Or do you simply take out the basket and shove the cuff on the hose down into the opening below the basket, thinking you’re getting better suction than using a skimmer vac plate?

It takes more work for cleaning the swimming pool and it is necessary to monitor the chemical level for at least 3 times per week. Cleaning the swimming pool is worth for safe use so it is necessary to consider a better hassle free cleaning technique. The Ground level of the swimming pool requires more maintenance as the dirt pool vacuum cleaner for cleaning the algae on the floor and wall of the swimming pool. When your pool is cloudy, then it is a sure sign that the water needs to be cleaned.

Choosing the best branded vacuum cleaner is most important to clean the swimming pool efficiently and you need to take your time for learning about the property of cleaning. There are normally 2 different types of vacuum cleaner for pool such as Manual or Automatic therse pool vacuum available at mypoolvacuum. Here is the step by step guide to use the pool vacuum Manual Pool Vacuum: All the manual pool vacuum consists of the vacuum head, pole and hose.

Hook up long pole into the vacuum head so that the pole will allow to move around to the bottom of the pool. Collecting the derbis is easier with the nose and pole in the cleaner. Connect one end of hose into vacuum head and all the manual vacuum will have the same technique. One side of hose will be swiveling with the other side attached to vacuum head. When all the cleaner is set, you can lower the hose into the pool until it reaches the bottom while take upper side of the hose in your hand.

How to Hook Up an Above Ground Pool Vacuum

Buy Now On Amazon Simply add the floc directly to the pool water and let your pool run for 2 hours if you have a sand filter with a multi-port valve, turn it to recirculate. After the pool runs for those 2 hours and the chemical has a chance mix into the water, shut the pool filter off completely for the next 8 hours. I would recommend doing this overnight.

Shop pool vacuums in the pool maintenance equipment section of Find quality pool vacuums online or in store. Skip to main content Skip to main navigation. Sign Up for Email. Be the first to know: Sign up for exclusive offers, tips and more. Sign Up. SIGN UP .

How do you hook up a vacuum to a skimmer for an above-ground pool? First off, you’ll need a vacuum hose. I usually put the small end over the jet and fill the hose with water. After the hose is full put the large end in the skimmer. Place your vacuum head in the pool, attach the hose to it, now you’re ready to vacuum. How do you hook up the vacuum hoses on a dodge ram conversion van?

Open the hood and look on the underside of it. There is a sticker there, usually on the left side, that shows the routing of the vacuum hoses. If you are going to replace your hoses, do the following. Take only one hose off at a time. Take an…other, replace it. Keep in mind that there are several sizes of hoses and the replacement must be the same size. If there is a sticker?

How to Vacuum a Pool Manually

It travels along the base of your pool and sucks up debris and dirt. These vanes are known as V-Flex technology and assist in providing maximum power with any flow and allow large bits of debris to be captured. The device comes pre-programmed to allow for internal steering sequences, ensuring the model covers all areas including both shallow and deep ends of the pool. Check Price on Amazon Pros It handles large debris without clogging.

The V-Flex technology allows bigger debris to pass through the self-adjusting variable vanes.

We Carry A Full Line Of Portable Pool Vacuum Solutions For Your Swimming Pool Cleaning Needs. Contact Us Today

If your swimming pool is not clean, it will of course be unpleasant for those using it, and apart from that, it will also reduce the life span of your pool. Therefore it is essential to establish a proper cleaning mechanism for your swimming pool. There are many tools that can be used to clean your pool. Some of them are listed below.

There are automated systems as well as manual systems that can be used to clean your pool. First of all you should ensure that your vacuum is suitable for cleaning swimming pools. If you want to clean your pool manually, you should adhere to the following steps. Attach the telescopic pole to the hose and to the vacuum head. Make sure that they are all connected properly, as if they are not, you can easily lose the vacuum head.

Gradually lower the vacuum head into the pool. Continue to feed the hose into the pool until air is eliminated from the hose. If you fail to do so by the time that the hose comes into contact with the bottom of the pool, and you connect the hose to your pump with air still inside it, you are likely to burn out the swimming pool pump. When you are sure that all the air has been removed from the hose, you have to pass the hose through the door of the skimmer and plug it into the vacuum port.


Intex above ground pools come in many shapes and sizes. They are easy to set up and offer a cost effective alternative to installing an inground pool. However, maintenance of an above ground pool is just like all other types of pools. Vacuuming the Intex above ground pool once a week keeps the water looking clean and clear. To vacuum a swimming pool, choose a vacuum, remove large debris, and then use the vacuum to remove the dirt from the bottom of the pool.

Choose a Pool Vacuum There are several types of pool vacuums on the market.

J-Hook pool liners A third style is J-hook (or Unibead) which can be installed in two ways, either using a hook that slips over the top of the pool wall or snapping it into an existing bead receiver.

Vacuuming your swimming pool is something that should be done on a weekly basis. Sometimes your swimming pool may not look dirty but there is actually lots of bacteria that you can not see growing on the walls and the floor of the swimming pool. The most important thing you have to remember when vacuuming any swimming pool is that have a good prime is the key to have great suction.

Often many pool owners do not spend enough time properly priming the vacuum hose only to experience hours and hours of problems because they just can not get the debris off of the pool floor. This happens because the swimming pool vacuum has a bad prime. There are a few things that you will need in order to vacuum your pool the correct way. You will need a vacuum hose that will reach all the way from one end of your pool to the other. You will also need a telescoping vacuum pole, vacuum head and a skimmer vacuum disk.

Pool Pump Looses Pressure When Kreepy Krauly Attached

Quick and easy to assemble Can be set up on most any level surface No tools required. Snap together framework contains no nuts, bolts or screws. Strong plastic construction provides years of hassle-free use. Automatic Vacuum Why add another chore to the list. Just hook it up and let it go. Our Leisure Vac automatic vacuums are designed specially for Splash a round pools and live to keep them clean.

It was begun with an ancient vacuum tube voltmeter, a five dollar card table for a service bench, and the marketing supplies, which consisted of marker pens and 3×5 cards for advertising, and a stapler to put up ad cards in grocery stores, trees, and anywhere else I could find.

Pool Ladder Above Ground Pools are no fun unless you can get in it and eventually, when you’re as wrinkled as a raisin, you’ll want to get out. Above ground pool steps and ladders are made from sturdy, waterproof resin. Weight limits vary so these are important to check if body weight is an issue. Be sure the ladder or steps you choose will be safe and able to hold up anyone who might use your above ground pool. You also want to consider what will be safest and easiest for children and the elderly to climb.

There are many ways to make your aquatic entrance, from the humble to the grand. The most basic is an above ground pool ladder. Single-sided or in-pool ladders are for use with an aboveground pool deck. The ladder attaches to the deck and goes into the above ground pool. A-frame ladders are double-sided for above ground pools without decks. If you decide to build a deck later on, a useful product is the A-frame conversion kit which allows you to separate the two halves of a Vinyl Works A-frame ladder.

One can then be used to enter the deck from the ground while the other goes from the deck into the above ground pool.

How To Install A Pressure Pool Cleaner